29mm Inkjet NTAG213

29mm square and 29mm circular NFC labels with a matt inkjet compatible coating. These labels are designed to be used with desktop label colour printers such as the Epson C6000.

NTAG213 chip for reliability and durability. Liner width of 40mm. Supplied on 76mm cores. Polypropylene top layer is water resistant but check with your printer inks for final print water resistance.

These labels are always provided on reels for use directly in label printers. Due to the varied nature of inkjet inks and material compatibility, we strongly suggest a trial order before ordering in quantity.

Important Notes
On any reel of NFC tags, there are 'non-functioning' labels. This is normal and under usual circumstances we would remove these from the reels. However, a few label printers cannot handle gaps in the reels and will present an out of paper notice if there's a label missing. Therefore, we do not remove dead/non-functioning tags on these reels. Non-functioning tags will be marked with an X. You can test your machine to see if it will handle a gap, print on them anyway and then remove later or try and manually replace the dead ones with a functioning tag. If you are encoding/programming your tags after print, we'd generally suggest print first and then remove the dead tags during encoding.

The liner material isn't black marked. Your machine needs to have a transmissive gap sensor and be set to use it to detect the material.

Seritag provide these labels to a number of our clients and are always happy to give advice related to the NFC aspect. We cannot give print machine specific advice such as helping with alignment issues, colour balance, label detection and so on. We strongly advise testing before any production roll-out or large scale order.

Pricing

Sorry, this product cannot currently be purchased online.

Please contact us for availability.